Evertz 7700R2x2-HD 2x2 HD/SD Modular Bypass Protection Router with backplane

Description

New card!
The 7700R2x2-HD Supports:
HD/SD-SDI and ASI TS Monitoring with Smart Switch Protection
Features
Support for HD and SD SDI inputs per ST 292-1 and SMPTE ST 259-1
Auto sensing of HD and SD input formats
Supports both 525i/59.94 or 625i/50 SD video formats
Automatic change-over based on programmable input signal monitors
Generation of three re-clocked program outputs and one preview output (HD if HD inputs are applied, SD if SD inputs are applied)
GPI control inputs for manual routing control
GPO status outputs for reporting selector cross-point status
Card edge menu control for configuration of operating modes
Card edge LEDs for reporting signal presence, router state, module status
Remote monitoring through NCP panels or
VistaLINK®
PRO
Bypass relay protection on program output
Controllable switch point when a Genlock reference is provided
VistaLINK®
capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO,
CP-2116E
or
CP-2232E
Control Panels. VistaLINK® is available when modules are used with the 3RU
7800FR
frame and a
7800FC
VistaLINK® Frame Controller module in slot 1 of the frame
Additional features on 7700RD2x2-HD model only
Program and preview monitoring SDI outputs (down-converted from HD if HD input applied, reclocked SD if SD input applied)
Support for 16:9 letterbox, 4:3 center crop, and 4:3 anamorphic squeeze aspect ratio conversions