Magewell USB Capture HDMI Plus

Description

Manufacturer Part Number:
32040
Input Interfaces
HDMI
DVI-D 1.0
HDMI 1.4
3.5mm audio jack
Microphone interface
Output Interfaces
USB 3.0
compatible with USB 2.0
compatible with USB 3.1 Gen 1
3.5mm audio jack
headphones interface
HDMI
HDMI loop-through interface
Input Features
Support for input video resolutions up to 40962160
HDMI Specific Features
297MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for up to 40962160 4:4:4/4:2:2 30fps or 40962160 4:2:0 60fps input signals
For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing
For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing
Support for 2 channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information and channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Analog Audio Features
Extract the embedded HDMI audio and output via 3.5mm headphones interface
Capture analog audio via 3.5 mm microphone interface
Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer.
Video Capture Format
Support for capture resolutions up to 20481080 or 19201200
Support for output frame rates up to 60fps. (Actual output frame rate can be limited by the USB bandwidth.
Support for YUY2 4:2:2 8-bit
More capture format can be set using USB Capture Utility
Video Processing Features
Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing
Wave
Blend top and bottom field
Top field only
Bottom field only
Video aspect ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of output aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
Auto or manual selection of input color format and quantization range
Auto or manual selection of output color format, quantization range and saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantization range
Support for Limited, Full and Extended gamut saturation range
Video frame rate conversion
Multiple Devices on one computer
Support for connecting multiple USB devices in one system
Set the device serial number as the device name shown in the system using USB Capture Utility
SDK
USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade
Multiple devices in one system can be upgraded simultaneously
LED Indicator
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor
98.1mm (L) x 56.8mm (W) x 17mm (H)
Power Consumption
5V max current: 900mA
max power consumption:~4.5W
Working Environment
Operating temperature: 0 to 50 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing